Connect with us

Technology

Motorola Edge 50 Fusion review

Published

on

Motorola Edge 50 Fusion

Reviews of Motorola Edge 50 Fusion phone, price, technical specifications, design, screen, software, hardware, battery life and charging and other specifications of this phone.

Motorola Edge 50 Fusion review

Review of Motorola Edge 50 Fusion phone

Introduction

After introducing the Edge 50 Pro and Edge 50 Ultra, Motorola has added a third member to its Edge line in the Edge 50 Fusion. The phone currently retails for around €350 in Europe, while its Pro counterpart costs over €800 and the Ultra is right around €1,000.

So, let’s just say that the mid-range title is solid and matches the Edge 50 Fusion quite well. Its Snapdragon 7s Gen 2 chipset certainly fits the bill well. But don’t rush to judge by this feature alone. The Edge 50 Fusion has good features, such as premium looks and IP68 ingress protection. Also, stereo speakers and a large 6.7-inch, fast 144Hz display.

Specifications of Motorola Edge 50 Fusion at a glance:

  • Body:  161.9×73.1×7.9mm, 175g; glass front, silicone polymer back (eco leather), plastic frame; IP68 dust/water resistant (up to 1.5m for 30 minutes).
  • Display:  6.70 inch P-OLED, 120 Hz (LATAM), 144 Hz (INT), 1600 nits (peak), resolution 1080 x 2400 pixels, aspect ratio 20:9, 393ppi.
  • Chipset:  Qualcomm SM7435-AB Snapdragon 7s Gen 2 (4nm) – International, Qualcomm SM6450 Snapdragon 6 Gen 1 (4nm) – LATAM: Octa-core (4×2.40GHz Cortex-A78 and 4×1.9x5Hz) – Inter International, Octa-core (4×2.2 GHz Cortex-A78 and 4×1.8 GHz Cortex-A55) – LATAM; Adreno 710.
  • Memory:  128GB 8GB RAM, 256GB 8GB RAM, 256GB 12GB RAM, 512GB 12GB RAM; UFS 2.2.
  • Operating System/Software:  Android 14.
  • Rear camera:  Wide (main)  : 50 MP, f/1.9, dual-pixel PDAF, OIS, 1.0 µm;  Ultra Wide Angle  : 13MP, f/2.2, 120°, 1.12µm, AF.
  • Front camera:  32 MP, f/2.5, (wide), 0.7 µm.
  • Videography:  Rear camera  : 4K@30fps, 1080p@30/60/120fps, gyro-EIS.  Front camera  : 4K@30fps, 1080p@30fps.
  • Battery:  5000 mAh; 68 watts wired, 50% in 15 minutes (advertised).
  • Connectivity:  5G; Electronic SIM card with two SIM cards; Wi-Fi 5; BT 5.2; NFC.
  • Other features:  fingerprint sensor, accelerometer, gyroscope, proximity, compass. Stereo speakers

It should be noted that  the Latin American version of the Edge 50 Fusion has differences in technical specifications compared to the international model as it is closer to the Moto G Stylus 5G (2024). This display has 120 Hz instead of 144 Hz and uses the Snapdragon 6 generation 1 chipset.

Back to the global model we’re reviewing here, there are naturally some reductions in the Fusion’s spec sheet compared to the Pro and Ultra. For example, the Fusion lacks a telephoto camera. It’s not all bad news, though, as the Fusion’s 50MP primary camera is pretty impressive on paper, as is the 13MP ultra-wide camera that has autofocus and doubles as a macro shooter.

Charging is also slightly reduced and Fusion uses only 68W wired charging without wireless charging capability. On the plus side, unlike the Pro and Ultra, which both pack a 4,500 mAh battery, the Edge 50 Fusion has a larger 5,000 mAh battery.

Unboxing

Motorola Edge 50 Fusion comes in plastic-free packaging. This product is shipped in a thick and sturdy cardboard box without any detailed color scheme. There’s a cardboard stand inside to hold the actual phone and a compartment for accessories.

Motorola Edge 50 Fusion review

Motorola Edge 50 Fusion has a very rich accessory package. You get a 68W charger in the box along with a USB Type-C to Type-C cable. The cable contains an electronic indicator chip. However, it is passive. It can still draw 5 amps, which converts to 100 watts at 20 volts. Data transfer through it is limited to USB 2.0 speed or 480 Mbps. Also, in the retail box, you get a hard plastic case for the phone.

Design and handling

Whether it’s in terms of shape, materials, or color, Motorola just has a way of making great-looking devices, and the Edge 50 Fusion is no exception. It looks elegant in the hand. Its body is quite thin and 7.9 mm. The back and front curve towards the middle frame, which has nice rounded corners.

Motorola Edge 50 Fusion review

Let’s start with the back. Although Motorola doesn’t mention Pantone’s involvement in the Edge 50 Fusion’s color choices, the design is just as appealing.

Motorola Edge 50 Fusion review

Each of the three distinct color options also comes with a special back material and finish. Our Marshmallow Blue review unit has a veggie leather finish that feels very soft and supple. It tends to pick up some lint and dirt, but more than makes up for it with its look and feel.

Motorola Edge 50 Fusion review

The hot pink color is complemented by something called vegan suede. We haven’t seen it in person, but we imagine a woven fabric-like texture. Finally, there’s Forest Blue, which is only described as having a “smooth matte finish.”

Just to reiterate, we love the look and feel of the Marshmallow Blue unit. It’s a very subtle blue, even though it appears off-white in photos. And the feel of the ultra fine and soft texture is excellent.

Motorola Edge 50 Fusion has a standard control set and layout. The power button and volume button are on the right side and are in a good position in terms of height. They’re on the thinner side, as the middle bezel isn’t particularly wide either. Tactile feedback could be better, but it’s not too bad.

Motorola Edge 50 Fusion review - Motorola Edge 50 Fusion Motorola Edge 50 Fusion review - Motorola Edge 50 Fusion
Motorola Edge 50 Fusion review - Motorola Edge 50 Fusion Motorola Edge 50 Fusion review - Motorola Edge 50 Fusion
Motorola Edge 50 Fusion

Both sides of the display curve are fairly aggressive. There are some bezels on the display, which are enough to hold a few sensors like the light and proximity sensors above the screen, hiding them nicely with the phone. However, we wouldn’t call the frame condition excessive by any means.

This phone uses an optical fingerprint sensor under the display. It is both fast and accurate. We have no complaints about it.

Motorola Edge 50 Fusion review

That being said, the Edge 50 Fusion looks and feels great. Motorola has done a great job with the mid-frame in particular. The color matches the back quite well, and even though it’s plastic, at least in our color variant, it provides a metallic finish.

The back is also made of plastic. It is covered with Corning Gorilla Glass 5 on the front.

Motorola Edge 50 Fusion review

Although some may not appreciate the plastic, we still do.. It’s structurally sound and rigid, without much weight. The total weight of the Edge 50 Fusion is only 175 grams. Plastic also does not dent like metal or shatter completely like glass. Plus, there’s absolutely no flex or hollowness in the Edge 50 Fusion.

The phone is well built, and the Fusion also has IP68 ingress protection.

Designing

Motorola Edge 50 Fusion has a large 6.7-inch P-OLED display. We have the international version of the phone, which means we get a 144Hz refresh rate. The panel has a native FullHD+ resolution of 1080 x 2400 pixels, which is slightly lower than the 2712 x 1220 pixels of the Edge 50 Pro and Edge 50 Ultra, but still quite sharp at around 393 ppi.

Motorola Edge 50 Fusion review

Motorola Edge 50 Fusion is very bright for its class. We measured exactly around 520 nits with the slider maxed out in manual mode, which is perfectly reasonable and on par with most competitors. In auto mode, the phone hit 1,322 nits in our standard test  – more than enough for full outdoor use.

Motorola Edge 50 Fusion review

 We measured just  2.8 nits of minimum brightness in the white point.

Motorola Edge 50 Fusion

Motorola Edge 50 Fusion

The Edge 50 Fusion’s display has 8-bit color depth and multiple color modes, including one for the sRGB color space and one for DCI-P3.

The Motorola Edge 50 Fusion can be upgraded to 144Hz. This screen supports 60Hz, 90Hz, 120Hz and 144Hz modes. The Latin American version of this phone is limited to 120 Hz. Our universal 144Hz unit has four refresh rate modes – Auto, 60Hz, 120Hz and 144Hz.

Motorola Edge 50 Fusion reviewThe 60Hz mode is quite clear. It just locks the refresh rate to 60Hz. All other modes use some form of automatic switching. The default auto mode only goes up to 120Hz and often switches to 90Hz depending on the amount of movement on the screen. Leave the phone for a few seconds and the refresh rate drops to 60Hz to save power. Even though this is not the most complex switching logic, it is generally good enough to improve performance.

120Hz and 144Hz modes also automatically change refresh rates. Only the latter actually goes up to 144 Hz. The actual switching logic does not change much and remains the same. It’s worth noting that some apps tend to insist on 60Hz or 90Hz performance, and there’s no list of per-app settings to override this behavior.

Naturally, we also tested high refresh rate games with a selection of titles that we know can push past the 60fps mark if allowed. Overall, we had little luck when using the default Auto mode. Switching to 144Hz allowed all of our test games to break the 60fps barrier, making high refresh rate gaming quite possible on the Edge 50 Fusion.

Overall, we are satisfied with how the device performs with its high refresh rate capabilities.

Unfortunately, the Edge 50 Fusion lacks any HDR video support. As reported by the operating system, the display is not HDR certified and does not even support an HDR decoder. On the plus side, the phone has the highest Widevine L1 DRM certification, which allows apps like Netflix to deliver FullHD streams to saturate the native screen resolution.

battery life

The Motorola Edge 50 Fusion scored very well in our exclusive test  at 12:40 hours  of active use. While it’s by no means a battery champ, it did particularly well in call and video playback tests. We wish web browsing and gaming were less of a drain on the battery, but still overall good performance.

Motorola Edge 50 Fusion

Motorola Edge 50 Fusion

Charging speed

The Motorola Edge 50 Fusion packs a 5,000mAh battery and supports Motorola’s 68W TurboPower charging. You get a compatible wall charger and a USB Type-C to Type-C cable right in the box.

Motorola Edge 50 Fusion reviewMotorola Edge 50 Fusion is not a fast charging device. However, it holds up well, managing to go from dead to 33% in 15 minutes  and then  60% in 30 minutes  . A full charge   takes over an hour – pretty reasonable in our book.

Motorola Edge 50 Fusion

Motorola Edge 50 Fusion

Motorola Edge 50 Fusion

 

Speakers – loudness and quality

The Motorola Edge 50 Fusion has a hybrid stereo speaker setup. There’s a dedicated speaker on the bottom, and amplified headphones take care of the other channel. This inherently causes the setup to be less than ideally balanced, as one speaker is larger than the other and faces downward rather than forward. Still, the Motorola Edge 50 Fusion sounds surprisingly good, with a rich and expansive soundstage and decent stereo separation. It’s worth noting that proper stereo only works when the phone is turned horizontally.

The Motorola Edge 50 Fusion earned a “Very Good” rating for loudness in our speaker test. It performed slightly better than the Motorola Edge 50 Fusion, but not by much. The Fusion 50 sounded significantly better to our ears than either of the Edge 40s, offering lower-end presence and a more balanced response in the higher frequency range.

Motorola Edge 50 Fusion

Use playback controls to listen to phone recordings (best with headphones). We measure the average loudness of the speakers in LUFS. A lower absolute value means a louder sound. A look at the frequency response graph tells you how far the reproduction of the bass, treble and mid-range frequencies is from the ideal flat “0db” line. You can add more phones to compare their differences. Scores and ratings are not comparable to our old speaker test.

The Motorola Edge 50 Fusion supports Dolby Atmos, including a Smart Audio mode that automatically adjusts volume, several equalizer presets, and a full manual equalizer mode. There is also a volume equalizer and surround sound for supported sources.

Connectivity

Motorola Edge 50 Fusion is available in single or dual SIM variants. It also supports eSIM. It has SA/NSA Sub-6 5G connectivity. For location services, it supports GPS, GLONASS and GALILEO.

For local connectivity, there is dual-band Wi-Fi ac and Bluetooth 5.2 with LE support. There’s an NFC on board but no radio receiver or 3.5mm audio jack.

Motorola Edge 50 Fusion reviewThe Type-C port on the Edge 50 Fusion is backed up by a USB 2.0 data connection, which means a theoretical maximum transfer speed of 480Mbps. This port has Host/OTG support, but unfortunately, no video output support. So basically there is no Motorola Ready For/SmartConnect support for connecting external displays via a cable connection.

Motorola Edge 50 Fusion reviewMotorola Edge 50 Fusion has a complete set of sensors. There is a TDK-Invensense ixm4x6xx accelerometer and gyroscope combo, a QST qmc630x magnetometer and compass combo, and a Sensortek stk3acx light and hardware proximity sensor combo. There is no barometer on the plane.

Android 14 with Hello UI on top

The Motorola Edge 50 Fusion runs Android 14 with Motorola’s in-house customizations, now called Hello UI (“Hello, Moto!”). Motorola promises three major Android updates and four years of security updates for the Edge 50 Fusion.

Motorola Edge 50 Fusion review

We’ve said many times that Motorola’s software is very similar to AOSP, with some built-in features and enhancements, which is largely true.

Motorola Edge 50 Fusion review

However, something as simple as a font can add a lot of personality, and Motorola has done it expertly. If you’re looking for personalization, there’s also an AI-generated wallpaper option – Motorola calls it Style sync, and the idea is to have a wallpaper that matches your current outfit.

There’s also an edge-to-edge lighting feature on the display that adds a little extra flair.

Motorola Edge 50 Fusion review

The customizations are in the regular Moto app “hub,” which has been reshaped for this iteration. Now things are organized more neatly, categories with lots of entries, like gestures, fitting things on one page, without having to scroll.

Moto App - Motorola Edge 50 Fusion Review Moto App - Motorola Edge 50 Fusion Review Moto App - Motorola Edge 50 Fusion Review
Engine application

Speaking of which, the info page for each move now has a better visual explanation.

Moto App Gestures - Motorola Edge 50 Fusion Review Moto App Gestures - Motorola Edge 50 Fusion Review Moto App Gestures - Motorola Edge 50 Fusion Review
Motion gestures of the Moto app

Moto Unplugged and Family Space are two features that limit access to apps and features for one of two reasons: on the one hand, to keep you calm or focused, or to limit the use of the child’s phone.

Moto Unplugged Review - Motorola Edge 50 Fusion Moto Unplugged Review - Motorola Edge 50 Fusion Family Space - Motorola Edge 50 Fusion review
Moto Unplugged • Moto Unplugged • Family Space

As mentioned earlier, unfortunately the Motorola Edge 50 Fusion does not support wired video output. However, you can still connect the device to a computer or external monitor (Miracast, Chromecast) via the new Smart Connect app. The new program replaces the old Ready For program and consolidates all connection options under one roof.

Smart Connect App - Motorola Edge 50 Fusion Review Smart Connect App - Motorola Edge 50 Fusion Review Smart Connect App - Motorola Edge 50 Fusion Review
Smart Connect app

While the OS and interface itself are very clean and clutter-free, the Edge 50 Fusion installed many apps and games without giving us the option to opt out.

Motorola Edge 50 Fusion review

Of course, you can remove them afterwards, but it’s still annoying.

Benchmarks and performance

So far, Motorola has avoided MediaTek chipsets in the Edge 50 family and has gone for Qualcomm components instead. The Motorola Edge 50 Fusion is based on the Snapdragon 7s Gen 2 – a chip that was recently announced in Q3 2023 and is based on Samsung’s 4nm 4LPE manufacturing process. Despite being a thoroughly modern chip, as the “s” in the name suggests, the 7s Gen 2 doesn’t have all the features of a modern chipset, according to Qualcomm’s naming convention. For example, it lacks a new and conventional CPU core. Instead, its CPU configuration has two quad-core clusters. One with ARM Cortex-A78 cores up to 2.4 GHz and the other with four Cortex-A55 cores running up to 1.95 GHz. The CPU is paired with an Adreno 710 GPU.

Motorola Edge 50 Fusion review

The Motorola Edge 50 Fusion is available in a total of four memory configurations: 128GB/8GB, 256GB/8GB, 256GB/12GB and 512GB/12GB. For this review, we have the high-end version with 12/512 GB. The RAM chips are LPDDR5, while the storage is UFS 2.2. There is no expandable storage, so make sure you get as much storage as you need.

We also remind you that we are reviewing the international version of the Motorola Edge 50 Fusion. In Latin America, the Snapdragon 6 generation 1 chipset is used.

Moving on to some real benchmarks, we start with the CPU and GeekBench tests. The Snapdragon 7s Gen 2 doesn’t shine much in the CPU department. This device is almost as powerful as the Samsung Exynos 1380 Dimensity 7030. The lack of a powerful core definitely hurts single-core performance, and the chipset fares slightly better in multi-core scenarios. However, you can get much better CPU performance in this price range.

Motorola Edge 50 Fusion

Motorola Edge 50 Fusion

AnTuTu is a much more sophisticated benchmark with GPU and memory tests. Compared to Edge 50 Fusion, it is not very favorable. However, at least it has devices like last year’s Edge 40 Neo and the ever-popular Redmi Note 13. The performance of the Edge 50 Fusion is pretty much in line with other devices that have the same Snapdragon 7s Gen 2 chipset.

Motorola Edge 50 Fusion
Motorola Edge 50 Fusion

The Adreno 710 graphics processor in the Edge 50 Fusion is also not particularly powerful. However, the Motorola Edge 50 Fusion outperforms the Edge 40 Neo and Moto G84, as well as the Samsung Galaxy A35 and Redmi Note 13.

Motorola Edge 50 Fusion
Motorola Edge 50 Fusion

Thermal-throttling

The Snapdragon 7s Gen 2 may not be an overly powerful chip, but it’s not too hot. The Motorola Edge 50 Fusion does a great job of cooling it and exhibits excellent thermal behavior.

Thermal bottleneck - Motorola Edge 50 Fusion review Thermal bottleneck - Motorola Edge 50 Fusion review Thermal bottleneck - Motorola Edge 50 Fusion review

Thermal throttling

Even with the long-term stress test, the surface of the phone is warm but still comfortable.

Good dual camera setup

Motorola Edge 50 Fusion has only one pair of rear cameras. Its bigger counterparts – Pro and Ultra also have telephoto. However, the 50-megapixel main camera is quite modern and equipped with OIS, and the 13-megapixel ultra-wide is no ordinary camera either. It has autofocus, so it can double as a macro shooter.

Motorola Edge 50 Fusion review

The main camera of the Motorola Edge 50 Fusion uses a Sony LYTIA LYT-700C 50MP sensor that offers full pixel autofocus and the lens has OIS. Motorola claims that this is the most advanced sensor in the segment.

The ultra-wide camera seems to be borrowed directly from the Edge model of 40 years ago. The lens is based on a 13-megapixel SK Hynix HI1336 sensor with 1.12 µm individual pixels and 1/3-inch optical format. The f/2.2 aperture lens has autofocus, so it can also function as a close-up camera.

  • Wide (primary)  : 50 MP Sony LYTIA LYT-700C f/1.9, 1/1.56″, 1.0 µm, PDAF, OIS; 2160p@30fps
  • Ultra-wide angle  : 13 MP SK Hynix HI1336, f/2.2, 1/3″ 1.12 µm, AF; 2160p@30fps
  • Front camera:  32MP Samsung ISOCELL S5KJD1, f/2.5, 1/3.14″ 0.7μm; 1080p@30fps

The Motorola Edge 50 Fusion uses Samsung’s 32MP ISOCELL S5KJD1 sensor on the front. Commonly known as the ISOCELL JD1, it features 0.7μm pixels and a 1/3.14-inch optical format. Its f/2.5 lens only has fixed focus.

The camera app on the Edge 50 Fusion is developed in-house, as opposed to the software approach it seems.

Motorola Edge 50 Fusion review

The basics are as usual – the camera modes are arranged in a customizable carousel shape, with the “More” tab at the far right end of the carousel holding rarely used shooting modes.

Pro mode gives you full control over camera settings such as white balance, ISO, focus, shutter speed and exposure compensation, and works on all cameras – both rear and selfie cameras (minus manual focus). A small live histogram is provided, but there are no focus points or zebras.

You get some settings in each camera mode right on the main interface, and others are hidden away in the settings menu. However, there is no direct separation of what you want to find where. For example, full-resolution mode for selfies is found in the settings menu, while full-resolution shooting for the rear cameras is accessible from the ‘Ultra-Res’ mode in the carousel. Many of the app’s features are vintage Moto stuff, so if you’re a repeat user you might be right at home, but that doesn’t necessarily make them intuitive.

Before we move on, we’d like to point out that on our Motorola Edge 50 Fusion review unit, we found the camera app to be very laggy and unresponsive. Hopefully it will be fixed with an update, but its current state is really poor. So much so that it seems to introduce stuttering into the captured footage.

Day photo quality

Main camera

The main camera of the Motorola Edge 50 Fusion takes photos with a resolution of 12.5 megapixels by default. These photos are solid through and through. There is a lot of detail in the frame and everything looks nice and sharp. There is practically no noise. The contrast is also good, the color saturation is very high. Many will enjoy the extra “pop”.

Motorola Edge 50 Fusion: 12.5MP Main Camera Samples - f/1.8, ISO 100, 1/1474s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP Main Camera Samples - f/1.8, ISO 100, 1/1150s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP Main Camera Samples - f/1.8, ISO 100, 1/3826s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: 12.5MP Main Camera Samples - f/1.8, ISO 100, 1/2683s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP Main Camera Samples - f/1.8, ISO 100, 1/3252s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP Main Camera Samples - f/1.8, ISO 100, 1/1228s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: 12.5MP Main Camera Samples - f/1.8, ISO 100, 1/3426s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP Main Camera Samples - f/1.8, ISO 636, 1/100s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP Main Camera Samples - f/1.8, ISO 321, 1/100s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: 12.5MP Main Camera Samples - f/1.8, ISO 432, 1/100s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP Main Camera Samples - f/1.8, ISO 100, 1/169s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP Main Camera Samples - f/1.8, ISO 100, 1/1787s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: 12.5MP main camera samples

The Edge 50 Fusion has a “style” selector in the main camera UI. There’s the default “Natural Style,” and then there’s the “Auto Enhance Style,” which is the equivalent of what the Enhance button does in the Google Photos app. The latter takes the color saturation up a notch for more “pop”. Here are some examples.

Motorola Edge 50 Fusion: 12.5MP main camera Auto-enhancement style samples - f/1.8, ISO 100, 1/1418s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 12.5MP main camera Auto-enhancement style samples - f/1.8, ISO 100, 1/2214s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 12.5MP main camera Auto-enhancement style samples - f/1.8, ISO 100, 1/1932s - Motorola Edge 50 Fusion review
Motorola Edge 50 Fusion: 12.5MP main camera Auto-enhancement style samples - f/1.8, ISO 100, 1/2492s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 12.5MP main camera Auto-enhancement style samples - f/1.8, ISO 100, 1/3501s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 12.5MP main camera Auto-enhancement style samples - f/1.8, ISO 100, 1/2805s - Motorola Edge 50 Fusion review
Motorola Edge 50 Fusion: 12.5MP main camera Auto-enhancing style samples - f/1.8, ISO 100, 1/3940s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 12.5MP main camera Auto-enhancement style samples - f/1.8, ISO 628, 1/100s - Motorola Edge 50 Fusion review
Motorola Edge 50 Fusion: Style samples 12.5MP main camera with auto upgrade

The Motorola Edge 50 Fusion takes great portraits with its main camera. Faces look beautiful and natural with pleasant skin tones and plenty of texture. The subject detection and separation is excellent and the background blur quality is excellent. The portrait camera interface offers keys for zoomed-in portrait shots that also look great.

Motorola Edge 50 Fusion: 12.5MP Main Camera Portrait Samples - f/1.8, ISO 322, 1/100s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP main camera portrait samples - f/1.8, ISO 293, 1/100s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 12.5MP main camera portrait samples - f/1.8, ISO 314, 1/100s - Motorola Edge 50 Fusion review
Motorola Edge 50 Fusion: 12.5MP Main Camera Portrait Samples - f/1.8, ISO 443, 1/100s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP main camera portrait samples - f/1.8, ISO 388, 1/100s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 12.5MP Primary Camera Portrait Samples - f/1.8, ISO 413, 1/100s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: 12.5MP main camera portrait samples - f/1.8, ISO 100, 1/169s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 12.5MP main camera portrait samples - f/1.8, ISO 100, 1/168s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 12.5MP main camera portrait samples - f/1.8, ISO 100, 1/163s - Motorola Edge 50 Fusion review
Motorola Edge 50 Fusion: 12.5MP Main Camera Portrait Samples - f/1.8, ISO 100, 1/1870s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP Main Camera Portrait Samples - f/1.8, ISO 100, 1/1736s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP main camera portrait samples - f/1.8, ISO 100, 1/1641s - Motorola Edge 50 Fusion review
Motorola Edge 50 Fusion: 12.5MP main camera portrait examples

You can force the main camera to shoot at full 50MP resolution (even a little over 50MP). However, these photos are useless in terms of detail. They are noticeably less processed and therefore smoother than regular photos. However, you have to deal with large file sizes.

Motorola Edge 50 Fusion: 12.5MP - f/1.8, ISO 100, 1/1938s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 50MP - f/1.8, ISO 100, 1/2840s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: 12.5MP - f/1.8, ISO 100, 1/618s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 50MP - f/1.8, ISO 100, 1/1414s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: 12.5MP • 50MP • 12.5MP • 50MP

The Edge 50 Fusion lacks a dedicated telephoto camera, but still has plenty of resolution in the main camera for a nice 2x digital zoom.

Motorola Edge 50 Fusion: 12.5MP main camera with 2x zoom - f/1.8, ISO 100, 1/1891s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP main camera with 2x zoom - f/1.8, ISO 100, 1/1863s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP main camera with 2x zoom - f/1.8, ISO 100, 1/2818s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: 12.5MP main camera with 2x zoom - f/1.8, ISO 100, 1/2192s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP main camera with 2x zoom - f/1.8, ISO 100, 1/1607s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP main camera with 2x zoom - f/1.8, ISO 100, 1/2036s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: 12.5MP main camera with 2x zoom - f/1.8, ISO 100, 1/2860s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 12.5MP main camera with 2x zoom - f/1.8, ISO 892, 1/100s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: 12.5MP main camera samples with 2x zoom

Ultra wide camera

The 13-megapixel ultra-wide camera on the Edge 50 Fusion is perfect. Its photos are beautiful and detailed and very sharp given the resolution available. However, a lot of this sharpening can look artificial.

Colors look good and have a bit more saturation and “pop” just like the original, although they don’t exactly match the original.

Motorola Edge 50 Fusion: 13MP Ultra Wide Camera Samples - f/2.2, ISO 100, 1/1256s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 13MP Ultra Wide Camera Samples - f/2.2, ISO 100, 1/1166s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 13MP Ultra Wide Camera Samples - f/2.2, ISO 100, 1/1546s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: 13MP Ultra Wide Camera Samples - f/2.2, ISO 100, 1/1690s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 13MP Ultra Wide Camera Samples - f/2.2, ISO 100, 1/1926s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 13MP Ultra Wide Camera Samples - f/2.2, ISO 100, 1/476s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: 13MP Ultra Wide Camera Samples - f/2.2, ISO 100, 1/2286s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 13MP Ultra Wide Camera Samples - f/2.2, ISO 339, 1/33s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: 13MP ultra-wide camera samples

The ultra-wide camera has a neat party trick thanks to its autofocus capabilities. Can do close-ups. These come out fairly well.

Motorola Edge 50 Fusion: 13MP Ultra Wide Camera Macro Samples - f/2.2, ISO 364, 1/33s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 13MP Ultra Wide Camera Macro Samples - f/2.2, ISO 290, 1/100s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 13MP Ultra-Wide Camera Macro Samples - f/2.2, ISO 169, 1/50s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: 13MP Ultra Wide Camera Macro Samples - f/2.2, ISO 100, 1/695s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 13MP Ultra Wide Camera Macro Samples - f/2.2, ISO 100, 1/870s - Motorola Edge 50 Fusion Review Motorola Edge 50 Fusion: 13MP Ultra Wide Camera Macro Samples - f/2.2, ISO 100, 1/4383s - Motorola Edge 50 Fusion Review
Motorola Edge 50 Fusion: Macro samples of the 13MP ultra-wide camera

selfie camera

Selfies from the 32-megapixel camera are released at 8-megapixel resolution by default. These look pretty good, although not perfect. Some skin texture is lost, and skin tones are decent, though a bit oversaturated.

Motorola Edge 50 Fusion: 8 MP selfie camera samples - f/2.4, ISO 100, 1/150s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 8 MP selfie camera samples - f/2.4, ISO 100, 1/426s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 8 MP selfie camera samples - f/2.4, ISO 100, 1/183s - Motorola Edge 50 Fusion review
Motorola Edge 50 Fusion: 8 MP selfie camera samples - f/2.4, ISO 100, 1/397s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 8 MP selfie camera samples - f/2.4, ISO 100, 1/245s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 8 MP selfie camera samples - f/2.4, ISO 100, 1/539s - Motorola Edge 50 Fusion review
Motorola Edge 50 Fusion: 8MP selfie camera samples

Camera quality in low light

The main camera takes very good photos in low light. There are many details. Colors look nice and light sources are well managed. Noise is also minimized.

Motorola Edge 50 Fusion: 12.5 MP low-light main camera samples - f/1.8, ISO 3371, 1/33s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 12.5 MP low-light main camera samples - f/1.8, ISO 2351, 1/13s - Motorola Edge 50 Fusion review
Motorola Edge 50 Fusion: 12.5 MP low-light main camera samples - f/1.8, ISO 2471, 1/33s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 12.5 MP low-light main camera samples - f/1.8, ISO 2000, 1/13s - Motorola Edge 50 Fusion review
Motorola Edge 50 Fusion: 12.5MP main camera examples in low light

Expect the ultra-wide camera to have a bit more trouble in low light than the main camera. However, the photos it takes are generally quite decent. There is a lot of detail, although there is also a lot of noise. Light sources tend to fade out quite often, but surprisingly, some details in the shadows aren’t quite crushed.

Motorola Edge 50 Fusion: 13MP ultra-wide low-light camera samples - f/2.2, ISO 2624, 1/20s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 13MP ultra-wide camera samples in low light - f/2.2, ISO 6400, 1/13s - Motorola Edge 50 Fusion review
Motorola Edge 50 Fusion: 13MP ultra-wide camera samples in low light - f/2.2, ISO 2224, 1/20s - Motorola Edge 50 Fusion review Motorola Edge 50 Fusion: 13MP ultra-wide camera samples in low light - f/2.2, ISO 3504, 1/20s - Motorola Edge 50 Fusion review
Motorola Edge 50 Fusion: 13MP ultra-wide camera examples in low light

Video quality

The Motorola Edge 50 Fusion can shoot 4K video at 30fps on all of its cameras, something you don’t see every day in its price segment. By default, videos are stored in an AVC/h.264 video stream at around 63Mbps with a 48kHz stereo AAC audio track inside an MP4 container. You can choose to shoot in HEVC/h.265 instead and save some space at the price of more limited playback compatibility.

The main camera takes excellent 4K videos. These have plenty of detail, no noise and a very wide dynamic range. Colors are once again fully saturated. There is no trace of over-sharpening or extreme contrast that we saw on the Edge 50 Pro and Ultra.

At 2x zoom, videos look comparable, though slightly sharper.

The ultra-wide camera captures surprisingly clean and detailed videos. These are a bit softer than the original, but on the plus side the colors aren’t nearly as saturated and look much better.

Interestingly, if you turn off the camera’s electronic stabilization, you’ll get a shaky 22fps video along with a wider field of view.

Motorola Edge 50 Fusion review

Selfie videos are completely static. Well, unfortunately, not in the literal sense, but because they are quite shaky with passive stabilization. Other than that, the quality is excellent and there is plenty of detail. Skin tones look good and some skin texture is lost.

Speaking of stabilization, you can enable it at full 4K resolution on either camera, which is great. It eats up a lot of frame, but that’s understandable. EIS generally does a great job of smoothing out bumps and shakes, but unfortunately, it introduces a bit of focus on the main and ultra-wide cameras. Since focus is fixed, selfies are not affected and benefit from near-perfect stabilization.

At night, the main camera does very well, especially in terms of detail. On the other hand, there is little noise in the frame, light sources are mostly muted, and darker areas lack detail for the most part.

Related article: Motorola Edge 50 Ultra review

Check competitors

At the time of writing, a base 8.128GB Motorola Edge 50 Fusion retails for around INR 25,499 (€280) in India. An 8/256GB unit   sells  for around €350 in Europe, and we  found a 12/256GB unit in the US for $550 (€506) . Therefore, it seems that the prices vary wildly. Let’s cap our rough budget at $500/€500 and see what else you can get for the price.

Motorola Edge 50 Fusion review

Starting from the Samsung camp, the Galaxy S23 FE is well-depreciated and fits right in our budget. However, it has aged quite a bit since it was launched in October 2023. So, we suggest you explore the Galaxy A55 instead. On average, it’s slightly cheaper than the Motorola Edge 50 Fusion, but the Exynos 1480 keeps it up and even beats the Snapdragon 7s Gen 2 inside the Moto. The phone has some great features like IP67 ingress protection, Gorilla Glass Victus Plus, stereo speakers, a microSD slot for increased storage and a stunning 6.6-inch, 120Hz, HDR10+ Super AMOLED display. And you certainly don’t have a telephoto camera like the S23 FE, but the A55’s settings are still pretty versatile. And as an added bonus, the Galaxy A55 has a bigger battery than the S23 FE and has much better battery life.

Samsung Galaxy A55 Xiaomi Redmi Note 13 Pro+ Xiaomi Poco F6 Realme GT 6T
Samsung Galaxy A55 • Xiaomi Redmi Note 13 Pro+ • Xiaomi Poco F6 • Realme GT 6T

Xiaomi’s own product line also has some interesting alternatives. There is the ever popular Redmi Note 13 series. Its most popular member right now seems to be the Redmi Note 13 Pro, at least according to our statistics. And you can certainly go this route and save a lot of money. You’ll have to live with IP54 ingress protection and a relatively unremarkable Snapdragon 7s Gen 2 chipset – like the Motorola Edge 50 Fusion. So why not spend just a little more and get the IP68-rated Redmi Note 13 Pro+ instead, as well as 120W fast charging, MediaTek Dimensity 7200 Ultra and a powerful 200MP main camera?

Speaking of Xiaomi phones, there is the new Poco F6 series. While the flagship F6 Pro is probably a bit pricey for the current budget, the entry-level Poco F6 is perfectly fine. And to be honest, we think this product is the better of the two phones. Some of the highlights include an IP64 body, Victus Gorilla Glass, and stereo speakers. You also get a great 12-bit HDR, super bright AMOLED display and 90W charging with a 5000 mAh battery.

Finally, let us introduce a regional variant – the Realme GT 6T. It has an excellent and ultra-bright HDR display, Gorilla Glass Victus 2 protection, stereo speakers and Snapdragon 7+ Gen 3, which is more powerful than the chip inside the Edge 50 Fusion. You also have a large 5500 mAh battery with super fast 120W charging.

Summary

Motorola Edge 50 Fusion is undoubtedly a wonderful device. This phone is very well made. IP68 ingress protection is also a great bonus to have. The Edge 50 Fusion’s display is also very solid, perhaps with the exception of the lack of HDR support. We have nothing but praise for the hybrid stereo setup. Camera performance is also very good all around.

Motorola Edge 50 Fusion review

We have to say that the biggest weakness in the Motorola Edge 50 Fusion specs sheet is probably the Snapdragon 7s Gen 2 chipset. It does not provide enough performance in the CPU or GPU departments. Even so, it’s not as if the Motorola Edge 50 Fusion didn’t struggle to do any specific task we threw at it, so we’re not too hard on the chipset, although it’s worth noting that you can get a lot better performance for this price. Be. We’d also like to see faster charging than the Motorola Edge 50 Fusion and possibly expandable storage, but again, we wouldn’t hold that much against the phone.

Motorola Edge 50 Fusion review

Finally, we’d say that when it comes to looks, you won’t be disappointed at all with this phone, but if looks aren’t your top priority, you should look elsewhere.

Why should we buy Motorola Edge 50 Fusion?

  • Excellent design, color and material.
  • IP68 ingress protection
  • Bright OLED with 144 Hz refresh rate and good refresh rate control.
  • Very good stereo speakers
  • Excellent cooling and thermal behavior.
  • All-round camera performance.

Why we should not buy the Motorola Edge 50 Fusion phone

  • No HDR support.
  •  There is no private fast charging.
  • There is no Type-C wired video output.

Source: GSMARENA.COM

Technology

Biography of Geoffrey Hinton; The godfather of artificial intelligence

Published

on

By

Geoffrey Hinton
Geoffrey Hinton, the godfather of artificial intelligence, revolutionized our world by inventing artificial neural networks. Do not miss the story of his ups and downs life.

Biography of Geoffrey Hinton; The godfather of artificial intelligence

Geoffrey Hinton (Geoffrey Hinton), a scientist who has rightly been called the “Godfather of Artificial Intelligence”, created a revolution in the world of technology with his research. Inspired by the human brain, he built artificial neural networks and gave machines the ability to learn, think, and make decisions. These technologies that are everywhere in our lives today, from voice assistants to self-driving cars, are the result of the relentless efforts of Hinton and his colleagues.

Hinton is now recognized as one of the most influential scientists of the 20th century, having won the 2024 Nobel Prize in Physics. But his story goes beyond awards and honors.

Geoffrey Hinton’s story is a story of perseverance, innovation, and the constant search to discover the unknown. In this article, we will look at the life and achievements of Geoffrey Hinton and we will answer the question of how one person with a simple idea was able to revolutionize the world of technology.

From physical problems to conquering the digital world

Hinton has been working stand-up for almost 18 years. He can’t sit for more than a few minutes due to back disc problems, but even that hasn’t stopped him from doing his activities. “I hate standing and prefer to sit, but if I sit, my lower back bulges out and I feel excruciating pain,” she says.

Since driving or sitting in a bus or subway is very difficult and painful for Hinton, he prefers to walk instead of using a private car or public transportation. The long-term walks of this scientist show that he has not only surrendered to his physical conditions but also to what extent he is eager to conduct scientific research and achieve results.

Hinton has been standing for years

For about 46 years, Hinton has been trying to teach computers like humans. This idea seemed impossible and hopeless at first, but the passage of time proved otherwise so much so that Google hired Hinton and asked him to make artificial intelligence a reality. “Google, Amazon, and Apple think artificial intelligence is what will make their future,” Hinton said in an interview after being hired by Google.

Google hired Hinton to make artificial intelligence a reality

Heir to genius genes

Hinton was born on December 6, 1947, in England in an educated and famous family with a rich scientific background. Most of his family members were educated in mathematics and economics. His father, Howard Everest Hinton, was a prominent entomologist, and all his siblings had done important scientific research.

Hinton knew from the age of seven that he would one day reach an important position

Some of the world’s leading mathematicians, such as George Boole, the founder of Boolean logic, and Charles Howard Hinton, a mathematician known for his visualization of higher dimensions, were relatives of Hinton. So, from a young age, there was a lot of pressure on Hinton to be the best in education, so much so that the scientist was thinking about getting a doctorate from the age of seven.

Hinton at the age of 7Geoffrey Hinton at seven years old
psychology, philosophy, and artificial intelligence; A powerful combination to create the future

Hinton took a diverse academic path; He began his primary education at Clifton College in Bristol and then went to Cambridge University for further studies. There, Hinton constantly changed his major, vacillating between the natural sciences, art history, and philosophy. Finally, he graduated from Cambridge University in 1970 with a bachelor’s degree in experimental psychology.

Hinton’s interest in understanding the brain and how humans learn led him to study artificial intelligence. Therefore, he went to the University of Edinburgh to continue his studies, where he began research in the field of artificial intelligence under his mentor, Christopher Longuet-Higgins. Finally, in 1978, Hinton achieved his seven-year-old dream and received his doctorate in artificial intelligence. The PhD was a turning point in Hinton’s career and prepared him to enter the complex and fascinating world of artificial intelligence.

Hinton’s diverse education, from psychology to artificial intelligence, gave him a comprehensive and interdisciplinary perspective that greatly contributed to his future research. This perspective enabled him to make a deep connection between the functioning of the human brain and machine learning algorithms.

Hinton decided to enter the field of physiology and study the anatomy of the human brain in his undergraduate course due to his great interest in learning about the workings of the human mind. After that, he entered the field of psychology and finally entered the field of artificial intelligence and completed his studies. His goal in entering the field of artificial intelligence was to simulate the human brain and use it in artificial intelligence.

If you want to learn about the functioning of a complex device like the human brain, you have to build one like it.

– Geoffrey Hinton

Hinton believed that in order to have a deep understanding of a complex device like the brain, one should build a device similar to it. For example, we normally think we are familiar with how cars work, but when building a car we will notice many details that we had no knowledge of before building it.

Only against the crowd, but victorious

While struggling with his ideas and thoughts and their opponents, Hinton met a number of researchers, such as Frank Rosenblatt (Frank Rosenblatt) in the field of artificial intelligence. Rosenblatt was an American scientist who created a revolution in the field of artificial intelligence in the 1950s and 1960s by inventing and expanding the perceptron model.

The perceptron model, one of the first machine learning models, is recognized as the main inspiration for the development of today’s artificial neural networks. Perceptron is a simple algorithm used to classify data. This model is inspired by the way brain neurons work. A perceptron is a mathematical model for an artificial neuron that receives various inputs, processes them using a weighted function, and decides on the output.

Hinton and Rosenblatt side by side
Hinton and Rosenblatt side by side

Rosenblatt’s hope was that one could feed a neural network a set of data, such as photographs of men and women, and the neural network, like humans, could learn how to separate the photographs; But there was one problem: the perceptron model didn’t work very well. Rosenblatt’s neural network was a single layer of neurons and was too limited to perform the assigned task of image separation.

Even when no one believed in artificial intelligence, Hinton didn’t lose hope

In the late 1960s, Rosenblatt’s colleague wrote a book about the limitations of Rosenblatt’s neural network. After that, for about ten years, research in the field of neural networks and artificial intelligence almost stopped. No one wanted to work in this field, because they were sure that no clear results would be obtained. Of course, nobody might not be the right word, and it is better to say almost nobody; Because the topic of artificial intelligence and neural network was completely different for Hinton.

Hinton believed that there must be a way to simulate the human brain and make a device similar to it. He had no doubt about it. Why did Hinton want to pursue a path that few would follow and almost no one saw a happy ending for? Thinking that everyone makes mistakes, this eminent scientist continued on his way and did not give up.

From America to Canada; A journey that changed the course of artificial intelligence

Hinton went to different research institutes in America during his research. At that time, the US Department of Defense funded many US research institutions, so most of the projects carried out or underway focused on military objectives. Hinton was not interested in working in the military field and was looking for pure scientific research and the development of technology for human and general applications. As a result, he was looking for a place where he could continue his research away from the pressures of the military and the limitations of dependent funds.

I did not want my research to be funded by military organizations, because the results obtained would certainly not be used for human benefit.

– Geoffrey Hinton

After searching for a suitable place to continue research, Canada seemed to be the most suitable option. Finally, Hinton moved to Canada in 1987 and began his research at the University of Toronto. In the same years, Hinton and his colleagues were able to solve problems that simpler neural networks could not solve by building more complex neural networks.

Hinton and his colleagues developed multilayer neural networks instead of building and expanding single-layer neural networks. These neural networks worked well and drew a null line on all disappointments and failures. In the late 80s, a person named Dean Pomerleau built a self-driving car using a neural network and drove it on different roads.

In the 1990s, Yann LeCun, one of the pioneers of artificial intelligence and deep learning, developed a system called “Convolutional Neural Networks” (CNNs). These networks became the basis for many modern techniques in machine vision and pattern recognition. One of the first important applications of these networks was to build a system that could recognize handwritten digits; But once again, after the construction of this system, researchers in the field of artificial intelligence reached a dead end.

In the 1990s, an interesting neural network was built, but it stalled due to insufficient data.

The neural networks built at that time did not work well due to the lack of sufficient data and the lack of necessary computing power. As a result, educated people in the fields of computer science and artificial intelligence once again concluded that neural networks and their construction were nothing more than a fantasy. In 1998, after 11 years at the University of Toronto, Geoffrey Hinton left Toronto to found and manage the Gatsby Computational Neuroscience Unit at University College London. During his research at this center, he studied neural networks and their applications.

AlexNet: A Milestone in the History of Artificial Intelligence

From the 1990s to 2000, Hinton was the only hopeful person on the planet who still believed in the development of neural networks and artificial intelligence. Hinton attended many conferences to achieve his goal but was usually met with indifference by the attendees and treated like an outcast. You might think to yourself that Hinton never gave up and moved on with hope, but that’s not the case. He was also sometimes disappointed and doubted reaching the desired result; But by overcoming despair, he continued his way no matter how difficult it was; Because this sentence kept repeating in Hinton’s mind: “Computers can learn.”

Watch: The story of the birth of artificial intelligence, the exciting technology that shook the world
Study ‘1

After returning to the University of Toronto in 2001, Hinton continued his work on neural network models and, together with his research group in the 2000s, developed deep learning technology and applied it to practical applications. In 2006, the world caught on to Hinton’s ideas and did not see them far away.

In 2012, Hinton, along with two of his PhD students, Alen Krizhevsly and Ilya Sotskever (the co-founder of OpenAI, the creator of ChatGPT), developed an eight-layer neural network program called AlexNet. The purpose of developing this program was to identify images in ImageNet, a large online database of images. AlexNet’s performance was stellar, outperforming the most accurate program up to that point by about 40 percent. The image below shows the architecture of Alexnet convolutional neural network.

AlexNet neural network

Viso

In the image above, C1 to C5 are convolutional layers that extract image features. Each layer has convolutional filters of different sizes that are applied to the image or output of the previous layer to detect different features. Also, the number of channels in each layer (96, 256 and 384) shows the number of filters used in that layer.

After feature extraction, the image is sent to fully connected layers (FC6 to FC8). Each circle in these layers represents a neuron that is connected to the neurons of the previous layer.

FC8 is the final output layer and consists of 1000 neurons. Due to the high number of layers and the ability to learn complex image features, the AlexNet architecture was very accurate in image recognition and paved the way for further improvements in the field of neural networks.

After developing AlexNet, Hinton and two of his students founded a company called DDNresearch, which was acquired by Google for $44 million in 2013. That same year, Hinton joined Google’s artificial intelligence research team, Google Brain, and was later appointed one of its vice presidents and chief engineers.

Hinton on Google

Businesstoday

From Backpropagation Algorithms to Capsule Networks: Hinton’s Continuous Innovations

Hinton has written or co-authored more than 200 scientific papers on the use of neural networks for machine learning, memory, perception, and symbol processing. While doing a postdoctoral fellowship at the University of California, San Diego, Hinton worked with David A. Rumelhart (David E. Rumelhart) and R. Wenald J. Williams (Ronald J. Williams) to implement a backpropagation algorithm on multilayer neural networks.

Hinton stated in an interview in 2018 that the main idea of ​​this algorithm was from Rumelhart, But Hinton and his colleagues were not the first to propose the backpropagation algorithm. In 1970, Seppo Linnainmaa proposed a method called inverse automatic derivation, which the backpropagation algorithm is a special type of this method.

Hinton and his colleagues took a big step in their research after publishing their paper on the error backpropagation algorithm in 1986. This article is one of Hinton’s most cited articles with 55,020 citations.

The number of citations of the 1986 article

Google Scholar

In October and November 2017, Hinton published two open-access papers on capsule neural networks, which he says work well.

At the 2022 Neural Information Processing Conference, Hinton introduced a new learning algorithm called forward-forward algorithm for neural networks. The main idea of ​​this algorithm is to use two forward steps instead of forward and backward steps in the error backpropagation method; One with positive (real) data and the other with negative data that only the network produces.

When the creator questions his creation

Finally, in May 2023, after about 10 years of working with Google, Hinton resigned from his job at the company because he wanted to speak freely about the dangers of the commercial use of artificial intelligence. Hinton was concerned about the power of artificial intelligence to generate fake content and its impact on the job market. Next, we read a part of Hinton’s words in an interview in 2023:

I think we’ve entered an era where, for the first time, we have things that are more talented than us. Artificial intelligence understands and has talent. This advanced system has its own experiences and can make decisions based on those experiences. Currently, artificial intelligence does not have self-awareness, but over time, it will acquire this feature. There will even come a time when humans are the second most talented creatures on earth. Artificial intelligence came to fruition after many disappointments and failures.

– Geoffrey Hinton

The supervisor of the doctoral course asked me to work on another subject and not to jeopardize my future work, but I preferred to learn about the functioning of the human brain and mind and simulate it, even if I fail. It took longer than I expected, about 50 years, to achieve the result.

At one point, the reporter asks Hinton at what point did you come to the conclusion that your idea about neural networks is right and everyone else is wrong? “I’ve always thought I was right, and I’m right,” Hinton replies with a pause and a smile.

With the advent of ultra-high-speed chips and the vast amount of data generated on the Internet, Hinton’s algorithms have reached magical power. Little by little, computers were able to recognize the content of photos, even later they were able to easily recognize sound and translate from one language to another. In 2012, words like neural networks and machine learning became the main words on the front page of the New York Times.

Read more: The biography of Ida Lovelace; The first programmer in history

From Turing to Nobel: The Unparalleled Honors of the Godfather of Artificial Intelligence

As one of the pioneers of artificial intelligence, Geoffrey Hinton has been recognized many times for his outstanding achievements. He has received numerous awards including the David E. Rommelhart of the Cognitive Science Society and Canada’s Gerhard Hertzberg Gold Medal, which is Canada’s highest science and engineering honor.

One of Hinton’s most notable honors was winning the Turing Award with his colleagues in 2018. This is a prestigious award in the field of computing, so it is referred to as the Nobel of Computing. This award was given in recognition of Hinton’s continuous efforts in the development of neural networks. In 2022, another honor was added to Hinton’s honors, when he received the Royal Society Medal for his pioneering work in deep learning.

2024 was a historic year for Geoffrey Hinton. He and John Hopfield won the Nobel Prize in Physics for their amazing achievements in the field of machine learning and artificial neural networks. The Nobel Committee awarded this valuable prize to these two scientists for their fundamental discoveries and inventions that made machine learning with artificial neural networks possible. When awarding the prize, the development of the “Boltzmann machine” was specifically mentioned.

When a New York Times reporter asked Hinton to explain in simple terms the importance of the Boltzmann machine and its role in pretraining post-propagation networks, Hinton jokingly referred to a quote from Richard Feynman :

Look, my friend, if I could explain this in a few minutes, it wouldn’t be worth a Nobel Prize.

– Richard Feynman

This humorous response shows that this technology is very complex and its full understanding requires extensive knowledge and study. Boltzmann machine is one of the first neural network models (1985), which as a statistical model helps the network to automatically find patterns in data.

Geoffrey Hinton is a man who turned the dream of machine intelligence into a reality by standing against the currents. From back pain to receiving the Nobel Prize in Physics, his life path was always full of ups and downs. With steely determination and perseverance, Hinton not only became one of the most influential scientists of the 20th century but also changed the world of technology forever with the invention of artificial neural networks. His life story is an inspiration to all who pursue their dreams, even when the whole world is against them.

Continue Reading

Technology

Everything about Cybercube and Robo Van; Elon Musk’s robotic taxis

Published

on

By

Elon Musk's robotic taxis
Elon Musk brought the idea of ​​smart public transportation one step closer to reality by unveiling Cybercubes and Robovans.

Everything about Cybercube and Robo Van; Elon Musk’s robotic taxis

After years of passionate but unfulfilled promises, finally on October 11, 2024 (October 20, 1403) at the WE, Robots event, Elon Musk unveiled Tesla’s robotic taxis.

Appearing on stage an hour late, Musk showed off the Cybercube self-driving taxi: a silver two-seater that moves without a steering wheel or pedals.

The CEO of Tesla further announced the presence of 21 Cybercubes and a total of 50 self-driving cars at the Warner Bros. studio (California), where Tesla hosted the event with special guests only.

Tesla Cybercab / Tesla Cybercab profile robotic taxi

Tesla

“We’re going to have a very glorious future ahead of us,” Musk said, but gave no indication of where the new cars will be built. According to him, Tesla hopes to offer Cybercubes to consumers at a price of less than 30,000 dollars before 2027.

The company will reportedly begin testing “unsupervised FSD” with Model 3 and Model Y electric vehicles in Texas and California next year.

Currently, the company’s self-driving cars operate with supervised FSD, meaning they require human support to take control of the steering wheel or brakes at any time. Tesla needs to get several permits from the regulators of different US states (or other countries) to offer cars without steering wheel and pedals.

But Cybercube was not the only product that was unveiled at this ceremony. Alongside the line-up of Optimus robots likely to launch as consumer work assistants in the coming months, the unveiling of an autonomous robotic van that can carry up to 20 passengers or be used to carry goods also generated more excitement among the audience.

Tesla Robovan side view

According to Musk, Robovans and Cybercubes use inductive charging and do not need a physical power connection for recharging. He also stated that “robovans” would solve the problem of high density and pointed to the transportation of sports teams, for example.

The CEO of Tesla has been drawing the dream vision of the company’s self-driving public transportation fleet for the shareholders for years and sees the company’s future in self-driving vehicles.

It is not bad to remind you that the WE, Robots event was the first product introduction event after the introduction of Cybertrack in 2019; The product, which entered the market in late 2023, has since been recalled 5 times in the United States due to various problems.

The event ended with Elon Musk’s “Let’s party” and a video of Optimus robots dancing, while Tesla’s CEO invited guests to take a test drive with the on-site self-driving cars inside the closed-off film studios.

However, experts and analysts of the self-driving car industry believe that the release of cybercabs will take longer than the announced schedule because ensuring the safety of these cars in scenarios such as bad weather, complex road intersections and unpredictable behavior of pedestrians will require many permits and tests.

Tesla shareholders still balk at Musk’s vague timetable for the production and delivery of new cars, as he has a poor track record of promising robotic taxis. But we cannot deny that this unveiling breathed new life into the world of self-driving technologies.

But where did the idea of ​​robotic taxis, which Tesla CEO claims are 10 to 20 times safer than human-driven cars and reduce the cost of public transportation, start?

Tesla Robovan next to Cybercube

Tesla

In 2019, during a meeting on the development of Tesla’s self-driving cars, Elon Musk suddenly made a strange prediction: “By the end of next year, we will have more than a million robot taxis on the road.”

Tesla’s investors were not unfamiliar with the concept of fully autonomous driverless cars, and what surprised them was the timing and short window of time of the plans that Musk was announcing. His prediction did not come true until the end of 2020, but has been postponed many times; But in recent months, with the decrease in Tesla’s interest rate, Elon Musk has tried in various ways to divert Wall Street’s attention from the company’s main activity and draw it to a new point. At every opportunity, he explains that the company’s future lies not in the production of electric cars, but in the very exciting world of artificial intelligence and humanoid robots.

According to him, one of the most profitable businesses in the field of AI will be driverless taxis or robotaxis that work almost anywhere and in any condition. Musk believes that Tesla’s market value will reach several trillion dollars after the release of these cars, although with this, Tesla will enter a highly competitive market.

Tesla’s technology will face fierce competition from Alphabet’s Waymo, Amazon’s self-driving unit Zoox, and General Motors’ Cruise. Also, ride-sharing companies such as Uber and Lyft and Chinese companies such as Baidu and BYD are considered serious competitors of Tesla.

Can robotaxis really save Tesla from declining profitability? How close is the company really to the production of driverless and fully autonomous car technology, and what guarantee is there for the success of Elon Musk’s plans to form a vast network of robotic taxis?

The start of the internal project of Tesla’s self-driving taxis

Elon Musk at the presentation ceremony of Tesla's autopilot system

Business Insider

Although Elon Musk has implicitly raised the idea of ​​robotaxis since 2016; the design and development operations of these cars took on a more serious color from 2022. At this time, during Tesla’s first-quarter earnings call, Musk once again announced that the company is building robotic taxis that do not have any steering wheel, pedals, or any other controller for physical human driving.

He also said that these cars will be fully self-driving and will be available to the public by 2024, when Tesla completes its self-driving car project. Sometime later, at the opening ceremony of the Gigafactory in Austin, he mentioned that the robotaxis would have a futuristic design and probably look more like a Cybertruck than a Tesla Model S.

Tesla’s robotic taxis have no steering wheel, pedals, or any other controls for physical human driving

During the same meeting, a Tesla investor asked Musk if the robot taxis would be offered to utilities or sold directly to consumers. Musk did not answer this question but continued to emphasize that robot taxis minimize the cost of a car per kilometer of distance, and the cost of traveling with these cars will be lower than a bus or subway ticket.

Sometime before Musk’s statement, Tesla announced that it is producing fully autonomous and self-driving vehicles at a cost of $25,000, which can have a steering wheel or not. For this reason, no one knows yet whether Musk’s robotaxis project refers to these cars or not.

According to the announced timeline, Tesla had 32 months to complete the construction, legal permits, and software required for the robot taxis and align with acceptable standards for “level 5 autonomy.”

At the beginning of 2024, the subject of robotic taxis made the news again. Elon Musk, who seemed fed up with Tesla’s usual car business, emphasized that Tesla’s future does not depend on selling more electric cars, but mainly on artificial intelligence and robotics.

Unlike Uber, which is Tesla’s main competitor in this project, Musk does not want to rely on Model 3 sedans and SUVs like the Model Y for the development of robot taxis. According to Tesla’s statement, the company is generally working on the production of new dedicated vehicles, which will probably be called Cybercab.

The supply of robotaxis depended on the completion of Tesla’s autopilot technologies and the so-called full self-driving systems, and exact statistics of how much consumers will accept this innovative product and what new rules will be imposed in this field were not announced.

Car design

Tesla Robotaxis concept design

Teslaoracle

In terms of design, the interior of the car was expected to have differences from other Tesla electric cars to meet the demands of passengers; For example, two rows of seats facing each other, or doors that open in a sliding manner and facilitate boarding of passengers. Also, a car that is used as a taxi should have provisions for simple and quick cleaning of the interior and even disinfection.

The idea of ​​robotaxis also received interesting design proposals from enthusiasts: some said it would be better for Tesla to optimize its public self-driving cars depending on different uses; For example, some of them have a place to rest for long distances, or others come with a monitor and several accessories that are suitable for working along the way.

Supporters said that these facilities improve people’s quality of life and even if a passenger devotes his travel time to something useful, he has saved the same amount of time.

Continuing speculation about the design of the Cybercube, a group of experts in the field of car research also said that in the coming years, Tesla could produce other vehicles that are suitable for special entertainment, such as watching movies, or other amenities for users who want to hang out with friends and fellow travelers along the way. To socialize yourself, have: just like sitting in a limousine.

The design of the Cybercube is similar to the Cybertruck van, but with doors that open from the top

But the initial design of the Cybercube, which was published on the Tesla website, was somewhat reminiscent of the Cybertruck, and there was no special feature even to make it easier for people with disabilities to ride.

Forbes also wrote in its latest report comparing self-driving cars of different companies that Tesla’s robot taxi will probably be a two-seater car with side-by-side seats and a retractable steering wheel because eventually, users will need a steering wheel to drive outside the areas that have the company’s support services. had

Tesla Cybercab Tesla Cybercab back and side view with open doors

However the final design of the Tesla Cybercube was not similar to the self-driving cars of the startup Zoox or Zeekr.

With doors that open up like butterfly wings and a small interior, this car only hosts two passengers. As we might have guessed, the Cybercube looks a lot like the Cybertruck, but it’s sleeker and more eye-catching than the controversial Tesla pickup.

Hardware

Tesla Cybercube Robotaxis

Sugar-Design

So far, Tesla has not disclosed any information about the set of sensors that will be used in the robotaxis. The company talks about Autopilot technologies on its website, but what Elon Musk has so far described as a fully self-driving, driverless car will require more advanced sensors, software and equipment than Autopilot.

Tesla Autopilot cars are equipped with multiple layers of cameras and powerful “machine vision” processing, and instead of radar, they use special “Tesla Vision” technology that provides a comprehensive view of the surrounding environment.

In the next step, Tesla Autopilot processes the data from these cameras using neural networks and advanced algorithms, then detects and groups objects and obstacles and determines their distance and relative position.

Tesla’s Autopilot system is equipped with multiple layers of cameras and powerful “machine vision” processing and uses “Tesla Vision” instead of radar.

Car driving functions also include two important eras: 1. adaptive cruise control with traffic detection that changes the car’s speed depending on the surrounding traffic; 2. The Autosteer steering system makes the car move on a certain line with the help of cruise control and continues the right path, especially when it encounters a curve in the road.

These cars can park automatically, recognize stop signs and other road signs as well as traffic lights, and slow down if necessary. Blind spot monitoring, automatic switching between road lanes, and intelligent summoning of the car by mobile application are some other features of these cars.

Despite all security measures, all Tesla Autopilot cars still require driver supervision according to national laws and the company’s own announcement. For this reason, until this company provides new specifications and information about the sensors, cameras, and systems of the robot taxis, no expert can check their efficiency or risk.

Introducing the Robotaxis application

The image of the map on the Tesla Robotaxis application

Tesla

In April 2024, Tesla released a brief report on the mobile application of robotaxis, and Elon Musk also said that the first of these cars would be unveiled in August (this date was later postponed).

In the initial images of the robotic taxis application, a button to call or summon a taxi and a little lower, the message of waiting time for the car’s arrival could be seen. The second image showed a 3D map and a small virtual vehicle following a path toward a waiting passenger. These images were very similar to the Uber app, except that it looked like a Tesla Model Y car was driving in it.

According to Tesla, passengers can adjust the temperature of the car as they wish when they are waiting for the taxi to arrive. Of course, other details such as the waiting time and the maximum passenger capacity of the car were also seen in the images of the application.

Passengers can adjust the temperature inside the car and their favorite music through the Tesla application

According to the published screenshots, in the next step when the vehicle reaches the origin and the passenger boards, the map view changes to the destination. Passengers can control the car’s music through the mobile application.

The app looks like a standard online ride-hailing app, but there’s no mention of the robotic nature of the car, which does all the driving automatically and autonomously. Elon Musk said in the same meeting:

You can think of Tesla’s robotaxis as a combination of Uber and Airbnb.

According to Musk, part of the fleet of robotic cars will belong to Tesla and the other part will belong to consumers. The owners of this group of robotic cars can give their cars to the taxi fleet whenever they want and earn money in this way.

Legal restrictions on removing the steering wheel and pedals

Tesla robot taxi without a steering wheel

independent

Despite all his previous promises, Tesla’s CEO has been evasive in past interviews when asked if the robotaxis will have traditional controls like pedals and steering wheels. Tesla’s Robotaxi plans have been heavily questioned due to delays in early prototype development, making the answer to the above question more important than ever.

The reality is that by mid-2024, in theory, it could take months or even years to approve a vehicle without pedals and a steering wheel for public roads, while a more traditional-looking vehicle could come much sooner.

In a letter addressed to its shareholders, Tesla emphasized that it would need the permission of the federal government to deploy and operate robotaxis with a more radical and progressive design. The statement also stated:

Scheduling robotaxis requires technological advances and regulatory approvals, but considering their very high potential value, we intend to make the most of this opportunity and are working hard on the project.

Elon Musk also did not respond to a question about exactly what type of regulatory approval Tesla is seeking.

He was then asked by reporters if Tesla was seeking an exemption from the Federal Motor Vehicle Safety Standards (FMVSS) to develop and market a car without traditional controls. In response, Musk compared Tesla’s new product to Waymo’s local self-driving cars and said that products that are developed for local transportation are very vulnerable and weak. He added:

The car we produce is a universal product that works anywhere. Our robotaxis work well on any terrain.

Currently, car manufacturers must comply with federal motor vehicle safety standards that require human controls such as steering wheels, pedals, side mirrors, and the like. These standards specify how vehicles must be designed before they can be sold in the United States, and if a manufacturer’s new product does not meet these requirements, manufacturers can apply for an exemption; But the US government has set a limit of 2,500 cars per company per year.

The regulatory exemption cap would theoretically prevent the mass deployment of purpose-built self-driving vehicles from any AV company, including Tesla. To date, self-driving car advocates have tried hard to pass legislation to cap the number of driverless cars on public roads; But the bill is apparently stalled in Congress due to questions about the technology’s “level of reliability” and readiness.

Tesla will need an FMVSS exemption if it wants to remove the steering wheel and pedals from its self-driving cars

So far, only Nuro has managed to obtain an FMVSS exemption, allowing it to operate a limited number of driverless delivery robots in the states of Texas and California.

For example, General Motors’ Cruise unit applied for a waiver for Origin’s steering-less and pedal-less shuttle, but it was never approved, and the Origin program was put on hold indefinitely.

Tesla Cybercab interior view and seats
Tesla Cybercab Tesla Cybercab interior view and interior space

Startup Zoox (a subsidiary of Amazon) also announced that its self-driving shuttles are “self-certified”, prompting the US National Highway Traffic Safety Administration to launch new research to understand this newly invented concept. Issues such as strict legal processes and approval of the license caused other companies in this field to completely ignore the issue of removing the steering wheel and pedals. For example, Waymo’s self-driving cars, although operating on public roads without a safety driver, have traditional controls. Some time ago, the company also announced that it would finally introduce a new driverless car, but did not specify an exact date for it, nor did it mention FMVSS exemptions.

Thus, now that it has been determined that the final Cybercube car will be produced without traditional controls, Tesla must also pass similar regulatory hurdles.

The challenges of mass production of Tesla robotaxis

Tesla's robot taxi design

Sugar-Design

Apart from persuading the regulators and getting a city traffic permit, there have been many other challenges standing in the way of the success of the robotaxis project, some of which Tesla has passed and has not found an answer for others.

For example, Tesla claims that it has reached a reliable milestone in terms of technologies and hardware infrastructure, but incidents such as the crash of Uber’s self-driving car in 2018, which killed a pedestrian, or two severe crashes of cruise cars in 2023, have a negative public view. It followed people into driverless cars.

On the other hand, the current infrastructure of most American cities is designed for conventional cars and must be updated and developed again to support the multitude of robotic taxis . For example, installing smart traffic lights that can communicate with self-driving cars and provide them with real-time information is one of the basic needs of robot taxis. Also, the presence of clear road lines and legible traffic signs is very important for self-driving car sensors.

The mass production of robotaxis requires changing the road infrastructure

Contrary to Musk’s claim that “the roads are ready for permanent robot taxis,” self-driving cars from other companies are still plying urban and intercity roads in certain parts of the United States. Until July 2024, Tesla had about 2.2 million cars on American roads, which is far from Elon Musk’s target of a fleet of 7 million cars.

In the second stage, Tesla’s self-driving cars are equipped with advanced technologies such as a variety of cameras and sensors and data processing systems, which, apart from the cost of production, also increase the cost of maintaining equipment and keeping software up-to-date.

In the past year alone, some Tesla customers have been forced to pay an extra $12,000 to upgrade their cars’ self-driving capabilities, while there’s still no news of new features.

If we consider the average price of robotaxis between 150,000 and 175,000 dollars, it is not clear how long Elon Musk’s promise to potential buyers about the revenue-generating potential of these cars will take. Unfortunately, Musk’s prediction regarding the annual gross profit of 30,000 dollars for the owners who give their cars to other passengers does not have statistical and computational support.

Developing new insurance models for self-driving cars will be one of Tesla’s serious challenges

The development of suitable insurance models for self-driving cars will also be one of Tesla’s serious challenges, because insurance companies must be able to correctly assess the risks and possible costs of robotaxis; Therefore, Tesla must cooperate with insurance companies from different angles to reach a comprehensive plan that both customers and companies are satisfied with.

In addition to paying attention to technological and legal issues, Tesla must gain people’s trust in its new series of fully automatic and driverless cars, and for this purpose, it will be necessary to hold advertising campaigns and extensive training programs to familiarize consumers with the company’s technologies and reduce the concerns of end users. was

The status of the project in 2024 and the concern of shareholders

Tesla Cybercab / Cybercab in the city

Tesla

In 2024, Elon Musk postponed the unveiling date of robotaxis to August 8 and then to October 10. In April, he told Tesla’s investors, who were frustrated by the uncertain progress of production of the cars.

All the cars that Tesla produces have all the necessary hardware and computing for fully autonomous driving. I’ll say it again: all Tesla cars currently in production have all the prerequisites for autonomous driving. All you have to do is improve the software.

He also said that it doesn’t matter if these cars are less safe than new cars, because Tesla is improving the average level of road safety. A few weeks later, he released another video in which he summarized meeting Tesla’s goals in three steps:

  • Completing the technological features and capabilities of fully autonomous vehicles
  • Improving car technology to the point where people can ride driverless cars without any worries
  • Convincing the regulators that the previous option is true!

While other companies producing self-driving cars go from city to city to obtain the necessary permits and try to expand the range of activities of cars by proving the safety of their products, NBC recently revealed in its report that Tesla even the states of California and Nevada, which employ the most employees. has not received a license to test these cars.

Tesla has not yet received permission to test robotaxis in the US states

In July, Musk told investors that anyone who does not believe in the efficiency and value of robotaxis should not be a Tesla investor. Meanwhile, the California Department of Motor Vehicles recently filed a lawsuit against Tesla, accusing the company of falsely advertising Autopilot and fully automated systems.

In addition to specifying the monthly cost and upfront payments for fully autonomous cars, the case also addresses the issue that both types of systems require drivers to be behind the wheel and control the vehicle’s steering and braking.

The unveiling of the Cybercubes in October 2024 seemed to ease the mind of Tesla shareholders somewhat, but during the night of the company’s big event, some of them expressed their concern about Musk’s uncertain timings to the media.

What do experts and critics say?

Some critics say that it is not possible for Elon Musk’s robot taxi to be produced and released according to his schedule. Referring to Waymo vehicles that make 50,000 road trips every week, this group considers Tesla’s silence regarding the request for technical information of the vehicles unacceptable. From their point of view, Musk is just continuing to make vague promises about this car.

In response to critics, Elon Musk emphasizes one sentence: that Tesla is basically an artificial intelligence and robotics company, not a traditional automobile company. So why doesn’t he try to clarify the obstacles that stand in the way of Tesla’s actions to realize the old idea?

On the other hand, the technology academies remind that Tesla’s systems have not reached level 5 autonomy, that is, conditions that do not require any human control. The MIT Technology Review writes:

After years of research and testing of robotic taxis by various companies on the road, mass production of these cars still has heavy risks. To date, these vehicles only travel within precise, pre-defined geographic boundaries, and although some do not have a human operator in the front seat, they still require remote operators to take over in an emergency.

R. Amanarayan Vasudevan , associate professor of robotics and mechanical engineering at the University of Michigan, also says:

These systems still rely on remote human supervision for safe operation, which is why we call them automated rather than autonomous; But this version of self-driving is much more expensive than traditional taxis.

Tesla is burning direct investor money to produce robotaxis, and it is natural that more pressure will be placed on the company to get more reliable results. The balance between costs and potential revenues will come when more robotaxis hit the roads and can truly compete with ride-sharing services like Uber.

Despite numerous legal, infrastructural and social challenges, the unveiling ceremony of Cybercube and RoboVon puts not only the technology levels of self-driving cars but the entire transportation industry on the threshold of a huge transformation. The entry of Tesla’s robotic taxis into the market can even affect the traditional taxi service model, but how long will it take for the transition from this unveiling to the actual launch

Continue Reading

Technology

How do we know that our phone is infected with malware?

Published

on

By

malware
Malware may seem like harmless programs, But they often send your information to cybercriminals and can cause you a lot of financial damage.

How do we know that our phone is infected with malware?

Today’s smartphones are not just a means to communicate with others, for many of us, they are a personal notebook, a family photo and movie album, a mobile bank, and a device for storing important daily information. These cases clearly remind us of the high importance of taking care of the phone and paying attention to the security of the information stored in this device.

Android and iOS operating systems become more secure with each update; But again, it is possible that due to reasons such as rooting the Android phone or jailbreaking the iPhone phone, we expose our phone to malware that in many cases enters the victim’s devices with the aim of stealing information and causing financial losses. .

Although hackers very cleverly infect victims’ phones with their desired malware, after the device is infected, there are changes in the normal operation of your phone, and by identifying them and contacting a repairman in time, you can remove the malware from your phone and prevent serious damage. Next, join us to get to know the 7 signs that indicate your phone is infected with malware and learn how to get rid of it.

Table of contents
  • 7 signs of phone virus infection
  • Abnormal increase in internet usage
  • Strange ads appear on the phone
  • Quick battery drain
  • Disabling phone apps and random device startup
  • Overheating of the phone body
  • Show unknown and new apps on the phone
  • Unstable internet connection or constantly dropping calls
  • How to remove malware from the phone?
  • How to prevent the phone from being infected with malware?

7 signs of phone virus infection

If your phone has recently experienced one or more of the following problems, it is likely that a malware is active on your phone:

Abnormal increase in internet usage

Many malware are usually designed to run permanently in the background of the phone and send personal information or files from the victim’s device to the hacker or download malicious files and hide them in certain parts of the phone. do This process is one reason for the phone’s internet to run out early because it increases the device’s internet usage unexpectedly to the point where, with a little precision, you can notice the difference between your usage in the current time period and, for example, the last week or month.

A smartphone with a danger sign on top of it in the hands of a man

Adobe Stock

To find out how much data is being used on your mobile phone (SIM card internet), go to one of the two paths below and see exactly how much internet each app consumes and if this amount is in line with what you expect from that app’s functionality. Does it match or not?

Information about the amount of internet usage on the Android phone

  • Enter Settings.
  • Tap the Connections option.
Checking the internet usage on the Android phone, the first step
Examining internet usage on Android phone, second step
Examining internet usage on Android phones, the third step
Examining internet usage on Android phones, the fourth step
  • Go to Data usage and Mobile data usage respectively.

Information about the amount of internet usage on the iPhone

  • Enter Settings.
  • Tap on Cellular and Cellular Data respectively.

If the Internet consumption by an application is much more than you expect or that application should not connect to the Internet, it is better to consider the application as malware and delete it from your phone.

Strange ads appear on the phone

Most cybercriminals design mobile malware with the goal of making money. Part of this revenue is generated by displaying strange random ads (for example, immoral sites) on victims’ phones. This type of advertisement, known as adware, directs victims to certain sites that are either designed to steal more information from the person, are phishing in nature, or encourage the victim to download malicious software and install it on their phone or even computer.

Related articles
  • What is malware and how to prevent it?
  • What is phishing? How to identify scam sites?

In addition, displaying multiple ads on your phone slows down the phone; A process that puts a lot of pressure on the battery and other hardware of the device; Of course, this is in the most optimistic scenario. If you click on these ads and don’t use IP masking tools (such as a VPN), there is a risk that your IP will be exposed to the cybercriminals behind this malware. Then, in addition to infecting your phone, you have to worry about the dangerous things hackers are doing with your IP.

Quick battery drain

If you have made sure of the health of your phone’s battery using Android or iPhone battery health testing methods, or if you have recently replaced the phone’s battery, but still have to charge it several times during the day, you should consider the possibility that the phone is infected with malware. The 24-hour running of malware in the background of the phone increases battery consumption to a great extent, and in addition to draining the battery quickly, it can increase the temperature of the device body.

Disabling phone apps and random device startup

It is normal for the apps installed on the phone to crash occasionally and it may happen for various reasons, including the app not being up-to-date; But this process should not be repeated constantly. If, in a short period of time, a significant number of apps on your phone freeze, don’t work as expected, close suddenly, or stop working completely, and won’t go back to their previous state even with an update, the hypothesis that your phone is a is infected with malware; is strengthened

Skeleton mark on a page as a sign of hacking

Adobe Stock

In addition, if the phone restarts automatically and the process of loading the phone’s user interface after startup takes longer than before, it could be a sign of malware in your phone that restarts the phone every time it stops working and restarts in the background. The phone should run.

Overheating of the phone body

It doesn’t matter if you are doing simple tasks with your phone or playing games and heavy software is running; If your phone is infected with malware, the body of the phone will become abnormally hot. This heat will not only prevent you from working with the phone, but by damaging the hardware of the device, it will slow down its performance when running your favorite programs.

Sudden and excessive heat in the body is a very serious alarm about the possibility of malware in the phone

Unfortunately, in most cases, there is no uniform process to heat up a phone infected with malware, and you may face this excessive heat once when running a light messenger like WhatsApp, and another time even when running a heavy program, the heat generated in The body should not attract so much attention to itself.

In any case, sudden heat generation in the body of the device that was not there before or was not present at this intensity is a serious alarm about the possibility of malware in your phone and you should show your phone to a professional repairer as soon as possible.

Show unknown and new apps on the phone

Besides executing commands to send your information to their designers, malware may also download and install new apps on your phone. These programs may seem harmless on the surface (for example, they look like an exercise training program), but ultimately, they are not installed on your device with good intentions and often do things like track your traffic and display numerous advertisements intended by malware designers or in Worse, they steal your personal and sensitive information (such as passwords to social media accounts).

A hacker in a black hoodie behind the computer

Adobe Stock

Be aware that most of these unknown and new apps usually have unreasonable permissions that allow them to access sensitive parts of the phone such as contacts, gallery, storage (phone and memory card), camera and microphone.

Unstable internet connection or constantly dropping calls

Malware communication on a phone or the malware designers’ server interferes with your phone’s ability to maintain a stable connection to the Internet or prevent call drops. If other devices that use the same Wi-Fi connection as you do not face the problem of unstable Internet connection, or if in the area where you are present, the SIM card antenna of other phones has no problem, you should suspect the possibility of your phone being infected with malware.

How do you remove malware from the phone?

If you see one or more of these symptoms on your phone and you suspect that your phone is infected with malware, you can identify the malware infecting your device and remove it through the following methods:

1. Removing malware from the phone through Safe Mode

Since most malware runs continuously in the background of the phone and closing them forcibly is not possible in some cases; It is better to delete the programs you suspect from your phone through Safe Mode. Android’s Safe Mode feature allows you to run the phone only with default system apps.

To enter Safe Mode on most Android phones, press and hold the Power button until the phone turns on and enters Safe Mode settings. In this mode, all the apps you have installed on the phone will be disabled and you can safely remove anything unusual and suspicious you see or apps you feel are infected from the phone.

Related articles
  • The best antivirus for Android phones
  • Do you have an iPhone and are worried about being hacked? Enable Lockdown Mode

If you are using an iPhone, turn off the phone first to enter Safe Mode, similar to Android phones. After that, press and hold the power button for a few seconds. After the device turns on, press and hold the Volume Down button until the Apple logo appears on the screen, then release it to enter Safe Mode. Keep in mind that, unlike Android phones, different models of iPhones are equipped with a feature called Lockdown Mode, by which, if the phone is targeted by malware or hackers, the functionality of the device will be limited until you remove this malware.

2. Install antivirus

Installing a powerful antivirus on your phone is the easiest way to identify and remove malware

Sometimes, even after entering Safe Mode, you may not be able to identify and remove malicious programs from your phone. In such a situation, you can take the help of a good antivirus.

Be careful not to use free antiviruses as much as possible, as many of these programs either don’t provide the functionality you need or are just malware hiding behind the title of antivirus.

Factory settings menu on the smartphone

3. Restore the phone to factory settings

Some malware, for reasons such as being new, may not be detectable even by the most up-to-date versions of antiviruses, and despite installing several strong antiviruses, you may still struggle with one or more of the symptoms we mentioned at the beginning of the article. In this case, you will have no choice but to restore the phone to factory settings.

If you have important information and have already saved a backup copy of the phone data, to restore the iPhone to its factory settings, go to Settings > General > Transfer or Reset iPhone tap Reset, and select Reset All Settings to reset all the phone data. delete

In Android devices, the path to the factory reset option may be different in different brands. For example, if your phone is a Samsung, you can restore your phone to factory settings as follows:

  • Go to Settings and click on Reset from the General Management section.
  • Select the Factory Data Reset option.

How to prevent the phone from being infected with malware?

Contrary to what some people think, most malware is designed with the intention of causing serious harm to victims, and they usually do so within the first hours and days of entering the victim’s machine. Since many of us, due to ignorance of the signs of the phone being infected with malware, find out about the presence of malicious software in our phone late, sometimes even removing the malware does not have a special effect on the phone’s performance; Because this malware has already caused the damage desired by cybercriminals.

Being vigilant and careful to prevent malware from entering the phone is the most important step to prevent the phone from being infected with malware.

This shows the importance of being vigilant and careful to prevent malware from entering the phone. Observing these things can help you achieve such a goal so that you can better protect the security of your phone:

1. Download your favorite apps from Google Play or App Store

Many users, eager to use modded versions of a paid program, download that program from unknown sites and easily expose their phones to the risk of being infected by malware. Hence, it is essential to download Android and iOS apps only from Google Play or App Store. Fortunately, sometimes some paid apps become free for a limited time and you can install them instead of the modded version. At Zomit, we regularly feature paid Android and iPhone apps that have become free today.

2. Pay attention to the opinions of other users about a program

Showing excessive and unusual ads, not providing the functionality claimed by the creators, constantly crashing the program or directing the user to links outside the program are among the alarm bells of suspected malware programs that are often written by users in the comments section of a program. They can be a good clue to dissuade you from downloading that program.

3. Pay attention to the permissions of each program

Suspicious access that doesn’t need to be requested for certain apps can be a red flag for you. For example, if you download a reader app, it shouldn’t ask you to access the camera, audience, or gallery.

A smartphone with lots of red letter icons

Adobe Stock

4. Do not download files from unknown devices

If you keep your phone’s Bluetooth on continuously due to using wireless headphones or Bluetooth hands-free, or the device’s AirDrop is always on, you should not accept files from unknown devices; Because this file (even in the form of a photo) may spread some kind of malware in your phone.

This includes receiving emails from unknown sources. Although you cannot prevent receiving these types of emails; if you receive them, you should not open these emails on your phone or computer and it is better to delete them immediately and block the sender of the email.

Read more: How to increase the security of Android phones?

5. Do not click on anonymous links

Many mobile phones get infected with malware by clicking on unknown links received through SMS or social media messages. You should note that you should never click on any unknown link, even from a familiar person. Or if you are determined, take help from reliable websites to determine if the link is safe.

Paying attention to the signs that your phone is infected with malware, as well as following the recommendations that can prevent malicious programs from entering your phone, are very important steps that keep your phone safe and prevent cybercriminals from stealing your personal and sensitive information.

Has your phone ever been infected? What solution did you use to fix it? Did you succeed in removing the virus?

Continue Reading

Popular